.Midnite Solar

Midnite Solar > MN-Battery Combiner with 1000A Bus bars and 100mV shunt for OutBack SystemsMidNite 1000amp battery combiner boxNot for use with SMAUseful for dual Radian inverters as well as for combining multiple strings of batteries.Includes a 1000amp Positive and Negative bus bar with 3/8 inch st..

DC Circuit Breakers are designed to handle DC (Direct Current) power...

Midnite Solar, Circuit Breaker, DIN Mount, 100A, 150VDC, MNEPV100MNEPV breakers are the same as CBI QY breakers except the standard used is inadequate for the solar industry. MidNite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada. All of the NRTL listings still apply...

DC Circuit Breakers are designed to handle DC (Direct Current) power...

MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.Environmental Rating - Type 1 (Indoor)DC Voltage Rating - 150VDCMNEPV breakers are the same as CBI QY breakers except the standard used is ..

SELECTABLE CHARGING MODES - 20A charger with 10A load control, 30A charger without load control p/v input voltage maximum - 60 volts15 Amp, 12/24 Volt MPPT Solar Charge Controller.This MPPT charge controller will handle up to 200 watts for 12 volt systems, or 400 watts for 24 volt system..

Mini DC Disconnect Midnite Solar - MNDC175MidNite Solar MNDC175, a white powder coated aluminum breaker box with one or two 175A/125 VDC main breaker(s),and 5 or 10 DIN rail breaker slots or 3 panel mount breaker slots."MidNite Solar proudly introduces their latest offering, the MidNite Solar “Mini-..

MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. Remote Trip breaker for use with our Battery Disconnect module ( MNBDM-24 or MNBDM-48 ) and the Rapid Shutdown System. Remote Trip breaker..

The MNTBB has four 1/0 & eleven #6 useable wire slots with a current rating of 180 amps. It is purchasable with two lengths of 10-32 screws. Both copper and aluminum wire is acceptable for use with these busbars and it is constructed from tin-plated aluminum. It has a Type – 1 environmental rating (..

180 Amp Terminal Bus Bar - MidNite Solar - MNTBB-BTin-plated aluminum terminal busbar insulated in the color of your choosing and rated for 180 amps. Features four slots for 1/0 wire and eleven slots for #6 wire. Copper and aluminum wire can both be usedMidNite SolarMNTBBBusbarFour 1/0 & eleven #6 u..

DC Circuit Breakers are designed to handle DC (Direct Current) power...

MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.Environmental Rating - Type 1 (Indoor)DC Voltage Rating - 150VDCMNEPV breakers are the same as CBI QY breakers except the standard used is ..